Product Highlights

• Programmable high and low alarm thresholds.
• All data is recorded to built-in, non-volatile memory. EasyLog data loggers do not lose readings when the battery is discharged or replaced.
• Automatic time and date stamping of logged data.
• Program the logger to begin recording immediately, or at a specific date and time.
• Bright, multi-color LEDs indicate status and alarm conditions during logging.
• Built-in USB interface for easy setup using any PC.
• Built-in, replaceable lithium battery (provided).
• Intrinsic isolation for voltage and current measurements.
• Removable cover protects the USB interface.
• Removable clip secures the instrument during transport or deployment.
• EasyLog application software for data logger setup, data download, and analysis.

EasyLog model EL-USB series products are a line of low cost, compact, battery-operated data loggers with built-in memory and USB interface. Each product in the line offers a specific measurement function and range .

EasyLog Products for Any Application

From temperature and humidity to carbon monoxide trending, there's an EasyLog data logger that's right for you:

Measurement		Model EL-USB
Function	Range	-1	-2	-2+	-2-LCD	-3	-4	-TC	-CO
Temperature	-35 to +80°C (-31 to +176°F)
Humidity temperature, dew point	0 to 100% RH -35 to +80°C (-31 to +176°F)		*	*	*
Voltage	0 to 30 VDC
Process current	4 to 20 mA
Thermocouple	-130 to +900°C (J-type) -200 to +1300°C (K-type) -200 to +350°C (T-type)
Carbon monoxide	0 to 1000 ppm

*EL-USB-2+ provides higher accuracy measurements than the EL-USB-2 and the EL-USB-2-LCD.

Easy to Program and Deploy

Getting an EasyLogger product ready to acquire data is simple:

1. Remove the protective USB cover.
2. Plug the instrument into any convenient USB port.
3. Program the data logger with the provided EasyLog software:
   • Give the logger a unique name (convenient when deploying multiple units).
   • Select the required sample rate.
   • Select high and/or low alarm thresholds.
   • Select the specific date and time to begin logging.